9 Best Automotive Tool Chests With Wheels (November 2026)
The best automotive tool chests with wheels include the LARBANKE 5-Drawer Rolling Tool Chest with Wheels (best overall for most garages), the Omelaza 8-Drawer Rolling Tool Chest with Lock for maximum storage, and the Dkenicor 6-Drawer Rolling Tool Chest for power tools and hanging storage.
On this page (5 sections)
The best automotive tool chest with wheels for most home garages is the LARBANKE 5-Drawer, because its drawers pull out completely and its plastic top shrugs off oil and dust. Pick the Omelaza 8-drawer if you need the most storage, the Dkenicor if you want a spot for power tools, or a 2-in-1 split box if you roll your tools to the car.
A mechanic's garage is a harder place for a tool chest than a woodshop. Oil drips, grit from the driveway and long-handled tools all push a cabinet past what a simple drawer cart handles.
An automotive tool chest with wheels needs to roll over concrete, lock shut, and keep sockets where you left them.
This roundup covers 9 rolling cabinets that fit a home garage wall. We compared them on drawer count and travel, locking, caster setup, cabinet size and the top surface.
The winner is the one that best handles everyday mechanic work at a fair size.
Our picks at a glance
-
1
Best overall for most garagesLARBANKE 5-Drawer Rolling Tool Chest with Wheels
8.9/10 our score
See it on Amazon -
2
Best for maximum storageOmelaza 8-Drawer Rolling Tool Chest with Lock
8.7/10 our score
See it on Amazon -
3
Best for power tools and hanging storageDkenicor 6-Drawer Rolling Tool Chest
8.6/10 our score
See it on Amazon
- 4
Check it8-Drawer Assembled Rolling Tool Chest
Best for buyers who want a split box - 5
Check it7-Drawer Heavy-Duty Rolling Tool Chest
Best for smooth drawer slides - 6
Check itVEVOR 2-in-1 5-Drawer Rolling Tool Chest
Best for working away from the bench - 7
Check itLARBANKE 7-Drawer Rolling Tool Chest with Wheels
Best for stacking two boxes - 8
Check it40-Inch 7-Drawer Rolling Tool Chest
Best for long tools and wide loads - 9
Check itSuperday 8-Drawer Rolling Tool Chest
Best for locking drawers in place while moving
The best automotive tool chests with wheels, ranked
Every box here rolls and locks. The ranking comes down to how well the drawers extend, how the locks work and how much cabinet you get for the footprint.
The top pick wins on drawer access and a top that tolerates garage conditions.
LARBANKE 5-Drawer Rolling Tool Chest with Wheels: Best overall for most garages
- 24.6 x 13 x 28.7 in
- Fully pull-out drawers
- Lock and two keys
- Four 2.5 in swivel casters, two braked
A compact roller with full-extension drawers and a waterproof plastic top, built for garage work rather than a showroom.
Pros
- Drawers pull out completely
- Waterproof, rust-resistant plastic top
- Brakes lock with one touch
- Connecting rods join same-series boxes
Cons
- Shortest cabinet here, so no large top compartment
- Plastic top looks less premium than steel
This is the best pick for most garages because it gets the basics right. Its five drawers pull out completely, so you can reach the back of a deep drawer without digging past the front row of sockets.
The cabinet is 24.6 inches wide and 13 inches deep, a size that tucks against most garage walls. It weighs 45.2 pounds, light enough for two people to shift without stripping the drawers first.
The top is molded plastic with a built-in tray. That matters around cars: oil, brake fluid and water wipe straight off, and the top won't rust the way painted steel can.
The plastic also runs along the base, so the bottom of the cabinet takes knocks from a jack or a toolbox without chipping. Two of the four 2.5-inch casters brake with one touch, while the other two are silent casters that protect a painted floor.
Two drawer heights split the storage: shallow drawers for wrenches and screwdrivers, deeper ones for socket rails and hammers. Silver stripes on the drawer fronts add grip and show up in a dim corner.
The lock comes with two keys, and a universal key opens other LARBANKE boxes in the series.
The trade-off is height. At 28.7 inches it's the shortest cabinet here, so there's no tall top compartment for bulky power tools.
Connecting rods let you bolt on the 7-drawer LARBANKE later, and the rods also fit the series double-door cabinet, so the stack can grow sideways as well as upward.
Omelaza 8-Drawer Rolling Tool Chest with Lock: Best for maximum storage
- 8 drawers plus top layer and bottom cabinet
- Detachable top box and bottom cart
- 6 side hooks and tool holes
- Powder-coated steel
The tallest, deepest-storing box in this group, with two locks so the split halves stay secure on their own.
Pros
- 8 drawers with EVA padding
- Top box nests inside the bottom cabinet
- Independent locks on each half
- Adjustable, removable bottom shelf
Cons
- Tallest cabinet here, needs more headroom to open the top
- More assembly than the pre-built boxes
If drawer count is your priority, this is the one to get. Eight drawers come in three sizes, two large, three medium and three small, and a bottom cabinet adds more room for bulky tools.
That makes 9 compartments and 10 storage levels in one cabinet, the deepest storage on this list. It suits a mechanic with a full socket set, impact guns and diagnostic gear, and the EVA padding in each drawer cushions heat-sensitive tools as well as protecting their surfaces.
The cabinet splits into a top box and a bottom cart. Each half locks on its own, so you can leave the cart in the garage and carry just the top box to a job.
The top box also nests inside the bottom cabinet when you want to save space or move the whole thing in a truck, and two carrying handles make the lift easier.
Six side hooks and tool holes in the handle add hanging room for cords and pry bars. The bottom shelf adjusts or comes out for oversized cases, and hooks on the cabinet door take more of the small stuff.
At 42.9 inches tall it needs more headroom to lift the top. It also arrives in more pieces than the one-piece boxes, so budget an hour for assembly.
Steel this tall also wants the heaviest tools kept low.
Dkenicor 6-Drawer Rolling Tool Chest: Best for power tools and hanging storage
- 2-tier side cabinet with hanging boards
- Hollowed handle for screwdrivers
- Two locking systems
- Industrial-grade swivel wheels
The only pick with a side hanging board, so drills and coiled cords sit outside the drawers.
Pros
- Side cabinet with hanging boards and hooks
- Handle cutout holds screwdrivers and wrenches
- Two separate locks
- Smallest footprint here
Cons
- Fewest drawers in this group
- Low 24.8 in height limits drawer stacking
This is the pick when your garage holds more than hand tools. A two-tier side cabinet with hanging boards gives you a place for a drill, an impact driver and coiled extension cords.
Round holes in the boards take hooks for small tools, and the hollow handle holds screwdrivers and wrenches within reach.
The six drawers handle hand tools, and two locks cover the flat top shelf and the lockable bottom cabinet door. That means the top box and the lower cabinet can be secured separately, which helps when the two halves are used apart.
Thick pads in each drawer keep sockets from clattering against the metal when the box rolls.
The footprint is the smallest here at 20.3 by 11.1 inches, so it slips into a gap a 24-inch box can't. It stands 24.8 inches tall, with 4.98 inches of ground clearance under it.
The four industrial-grade swivel wheels handle gravel and concrete per Dkenicor, and two of them brake at any position.
The trade-off is drawer count and height. Six drawers and 24.8 inches means less stacking room than the 8-drawer boxes, and at 49.6 pounds it's heavier than the LARBANKE despite being smaller.
Choose it for the side hanging space, not the drawer count.
8-Drawer Assembled Rolling Tool Chest: Best for buyers who want a split box
- Detachable top tool box
- 8 drawers plus top layer and bottom cabinet
- 8 hooks and tool holes
- Top box stores inside bottom cabinet
A two-piece roller that arrives assembled, so you can separate the top box for a job and wheel the cabinet back to the wall.
Pros
- Main unit arrives assembled
- Top box lifts off with two handles
- All four casters braked
- EVA padding in the drawers
Cons
- Ships with more parts to fit than a one-piece box
- Two locks mean two keys to keep track of
This one suits a buyer who wants the split-box idea without a long build. The main unit arrives assembled, so you fit the casters and handles and get to work.
The top tool box lifts off by its two handles when you need a chest at the car, and a hand bar on the bottom cabinet helps you steer when the whole box is together.
Storage is an 8-drawer layout with two large, three medium and three small drawers, plus a top layer and a bottom cabinet. Eight hooks beside the cabinet hold hanging tools, and tool holes in the side handle take more.
The top box stores inside the bottom cabinet for transport or tight storage.
All four casters brake, which holds the cabinet more firmly than the two-brake setups on most boxes here. That matters on a sloped driveway or a slick epoxy floor.
Drawers come with liners and EVA padding, and a manual plus a video guide cover the parts you bolt on. At 60.2 pounds it's one of the heavier boxes here, so plan where it lands before you build it.
It costs you assembly time and a second lock to manage. If you'd rather have one solid cabinet that never splits, the Maxority 7-drawer is the simpler answer.
7-Drawer Heavy-Duty Rolling Tool Chest: Best for smooth drawer slides
- Ball-bearing drawer slides
- All-steel construction
- Four lockable swivel wheels
- 13 x 24 x 30 in
Built around ball-bearing slides for heavy drawer loads, with a plain steel cabinet and no split top.
Pros
- Ball-bearing slides for loaded drawers
- All four wheels lock
- Simple one-piece cabinet
- Straightforward assembly
Cons
- No detachable top box
- Fewer storage levels than the 8-drawer picks
The drawer slides are the reason to choose this box. Ball-bearing slides keep a drawer moving smoothly even when it's loaded with sockets and wrenches, and they remove the sticking that plagues cheap friction slides.
For a mechanic opening the same drawer all day, that's a real comfort gain.
The cabinet is 24 by 13 by 30 inches, so it's a little taller than the LARBANKE but still compact. Seven drawers give you a workable split between hand tools and small parts, and the 60-pound all-steel body takes daily garage use.
All four wheels lock rather than just two, which holds the cabinet steady when you pull a heavy drawer on a smooth floor.
It's a one-piece design with no detachable top, so you can't carry a smaller chest to the car. Assembly is simple, with instructions in the box.
Choose it if smooth slides and a solid cabinet matter more than a split design or maximum drawer count. It's the box for someone whose tools stay in one place and who cares how a loaded drawer feels on the hundredth open of the day.
VEVOR 2-in-1 5-Drawer Rolling Tool Chest: Best for working away from the bench
- Detachable 4-drawer top chest
- Lock bar locks drawers and doors together
- Perforated panel and 3 hooks
- EVA padding
A two-piece design that splits into a carryable chest and a rolling cabinet, handy for jobs in a driveway or a neighbor's garage.
Pros
- Top chest lifts off and carries
- One lock bar secures everything
- Perforated panel with hooks
- Pre-assembled main parts
Cons
- Only 5 drawers
- Shallower 11 in depth limits long tools
This is the best box for jobs away from the bench. It splits into a four-drawer top chest and a rolling cabinet, so you can lift off the chest and take it to a driveway repair or a neighbor's car.
The cabinet stays behind with the bulkier tools.
A single lock bar locks the drawers and cabinet doors together in one turn, which keeps everything shut when you roll the cabinet across uneven concrete. The perforated panel and three galvanized hooks add hanging space on the side, and the handle doubles as a tool rack.
EVA pads in the drawers cut noise and protect tools.
The cabinet is 40.9 inches tall but only 11 inches deep. That's the shallower depth in this roundup, so long breaker bars and torque wrenches don't fit as easily.
Five drawers is also fewer than the 8-drawer boxes. It's pre-assembled, with only casters, the shelf and the screwdriver rack to fit, and it weighs 41.7 pounds, the lightest tall box here.
LARBANKE 7-Drawer Rolling Tool Chest with Wheels: Best for stacking two boxes
- 7 drawers in two heights
- Fully pull-out drawers with anti-tip design
- Universal key across the series
- Connecting rods for stacking
The bigger sibling of the top pick, sold to pair with it so two boxes become one tall stack.
Pros
- Connecting rods link to the 5-drawer LARBANKE
- Universal key works across the series
- Full-extension drawers with anti-tip stop
- PE foam drawer liners
Cons
- Heavier than the 5-drawer version
- Barely more storage than the 8-drawer boxes at a lower score
This is the companion box to the top pick. Its connecting rods let you bolt it to the LARBANKE 5-drawer so the two become one tall stack.
Buy it when your tool collection has outgrown a single cabinet but the floor space hasn't grown with it.
Seven drawers in two heights, two shallow and five deep, give you room for sockets and wrenches up top and bulkier tools below. The drawers pull out fully with an anti-tipping stop and run on PE foam liners.
The universal key opens the whole LARBANKE series, so one key covers both boxes in the stack. The plastic top is divided into compartments, so small parts stay put between jobs.
It's heavier than the 5-drawer version at 57.5 pounds and stands a little shorter at 28.6 inches. The casters detach if you'd rather set it on a shelf or a bench.
On its own it's a fine box, but its real job is as the second half of a stack. Pair it with the top pick and you get 12 drawers in a footprint barely wider than a single cabinet.
40-Inch 7-Drawer Rolling Tool Chest: Best for long tools and wide loads
- 40 in class cabinet
- Double-sided bottom door
- Independent safety lock
- Silent swivel casters with rear brakes
The widest, tallest cabinet here, sized for torque wrenches and long breaker bars that don't fit a compact box.
Pros
- Widest cabinet in this roundup
- Bottom door opens from both sides
- Cold-rolled steel body
- Silent casters
Cons
- Needs a wide wall gap
- Higher price tier than the compact picks
This is the widest cabinet here, and that's the whole point. A 40-inch class box with a double-sided bottom door suits long tools: torque wrenches, breaker bars and extension sets that don't fit in a compact 24-inch cabinet.
The bottom door opens from either side so you can reach large items without walking around.
Seven drawers sit above it with varied sizes, lined to protect tool surfaces and quiet the rattling when you pull them. The cold-rolled steel body is bent from one piece and finished in powder coat for wear and rust resistance.
Silent swivel casters keep noise down, the rear wheels brake independently, and the ergonomic handle makes steering easy.
The catch is space. A cabinet this wide needs a clear wall run, and the taller 41-inch height takes more floor-to-ceiling room.
The top box tucks inside the bottom cabinet in the crate, which keeps shipping compact but means you fit the wheels and handles before use. AIRAJ also rates it not water resistant, so keep it out of the rain.
Choose it if long tools are your main problem and you have the wall for it.
Superday 8-Drawer Rolling Tool Chest: Best for locking drawers in place while moving
- 8 drawers plus top drawer and bottom cabinet
- Two locking levers
- Detachable box and roller
- EVA padding
A split 8-drawer box whose locking levers pin drawers and doors shut for rolling across a workshop floor.
Pros
- Two levers lock drawers and doors
- Detachable top box
- EVA drawer padding
- Main unit arrives pre-assembled
Cons
- Lowest score here
- Tall cabinet takes more floor-to-ceiling room
This box is built for moving day. Two locking levers pin all the drawers, the top tray and the bottom cabinet shut in one motion.
That stops drawers sliding open and doors swinging wide when you push the cabinet from one end of the garage to the other.
The 8-drawer layout matches the Omelaza and the 8-Drawer Assembled box: two large, three medium and three small drawers, plus a top drawer and a bottom cabinet, for 10 compartments in all. EVA padding protects tools, and the whole cabinet splits into a box and a rolling cart for independent use.
It arrives mostly pre-assembled, so the wheels and brackets are all you fit, and the packaging uses foam to protect it in transit. Two braked wheels hold it in place on flat concrete.
It scores last here because the locking levers and split design are useful but the cabinet offers nothing the 8-drawer boxes above don't, and it leaves the floor-to-ceiling room of a 42.5-inch cabinet to fill. Choose it if moving the box often is your routine.
How these automotive tool chests compare
The comparison table lines up drawer counts, cabinet sizes and wheel setups so you can see where each box gives up space. For a garage, drawer travel and the top surface matter as much as drawer count.
| Product | Best for | Drawers | Size (W x D x H) | Wheels | Our score |
|---|---|---|---|---|---|
| LARBANKE 5-Drawer Rolling Tool Chest with Wheels | overall for most garages | 5 (two heights) | 24.6 x 13 x 28.7 in | 4 x 2.5 in swivel, 2 braked | 8.9 |
| Omelaza 8-Drawer Rolling Tool Chest with Lock | maximum storage | 8 (2 large, 3 medium, 3 small) | 24.2 x 13 x 42.9 in | 4 swivel casters, 2 braked | 8.7 |
| Dkenicor 6-Drawer Rolling Tool Chest | power tools and hanging storage | 6 | 20.3 x 11.1 x 24.8 in | 4 swivel, 2 braked | 8.6 |
| 8-Drawer Assembled Rolling Tool Chest | buyers who want a split box | 8 (2 large, 3 medium, 3 small) | 24.13 x 13 x 42.5 in | 4 casters, 4 braked | 8.3 |
| 7-Drawer Heavy-Duty Rolling Tool Chest | smooth drawer slides | 7 | 24 x 13 x 30 in | 4 swivel, lockable | 8.2 |
| VEVOR 2-in-1 5-Drawer Rolling Tool Chest | working away from the bench | 5 | 23.6 x 11 x 40.9 in | 4 x 360° casters, 2 braked | 8.0 |
| LARBANKE 7-Drawer Rolling Tool Chest with Wheels | stacking two boxes | 7 | 24.6 x 13 x 28.6 in | 4 x 2.5 in swivel, 2 braked | 7.9 |
| 40-Inch 7-Drawer Rolling Tool Chest | long tools and wide loads | 7 | 21 x 12 x 41 in | 4 silent swivel, 2 braked | 7.7 |
| Superday 8-Drawer Rolling Tool Chest | locking drawers in place while moving | 8 (2 large, 3 medium, 3 small) | 24.2 x 13 x 42.5 in | 4 wheels, 2 braked | 7.6 |
How we compared these rolling tool chests
Our score weighs specs, features and buyer feedback against what you're shopping for. We checked drawer counts and travel, locking systems, caster type and brakes, cabinet size and top surface.
We also looked at how each box handles a garage setting: rolling over concrete, locking shut, and keeping sockets from rolling out during a move. A box with more drawers only ranks higher when the extra storage is easy to reach.
Our thinking starts with the product data and how well the cabinet fits a home mechanic's daily work, and we scored buyer ratings as a check on that fit rather than as the lead.
A few patterns showed up across the nine boxes. The tallest cabinets are all around 42.5 inches and split into two pieces, while the one-piece boxes sit around 28 to 30 inches.
Every box here has braked casters, but only three brake all four wheels. Drawer liners, EVA or PE foam, are on most of the tall boxes and on both LARBANKE units, and that detail sets the plastic-top LARBANKE apart from the plain steel cabinets.
What should you look for in an automotive tool chest with wheels?
The first thing to check is drawer travel. A drawer that pulls out fully lets you reach the back without lifting out the front row of sockets, and that's the difference between a box you like and one you fight.
The LARBANKE boxes and the Omelaza all have full-extension drawers.
A short-travel drawer wastes the back third of its depth.
Then look at drawer heights. A mix of shallow drawers for wrenches and deeper ones for sockets and hammers beats a stack of identical drawers.
Both LARBANKE boxes split their drawers between 1.37-inch and 3.1-inch depths. That's a useful pattern for mechanic tools, because the shallow rows hold wrenches one deep and the deep rows take socket rails stacked two high.
Finally, look at the top. A flat steel top works as a small bench, but it dents and rusts under oil and brake fluid.
A plastic top like the LARBANKE's wipes clean and stays rust-free. The VEVOR and Dkenicor add side panels and hooks for hanging tools outside the drawers.
Should you buy a split box or a one-piece cabinet?
Buy a split box if you work away from the bench. The Omelaza, Dkenicor, VEVOR 2-in-1 and 8-Drawer Assembled boxes all separate into a top chest and a bottom cart.
The max split leaves a four-drawer chest you can carry by hand and a cabinet that stays with the heavier tools. That's a real advantage in a driveway or a shared garage.
Buy a one-piece cabinet if your work stays at the bench. The Maxority 7-drawer and the LARBANKE 5-drawer are simpler, with fewer locks and fewer parts to fit.
A single cabinet also feels more solid when you lean on it.
Split boxes cost you more setup and more keys. Each half usually locks on its own, and two keys to a box is one more to lose.
If you never carry tools far, that's complexity you don't need.
How many drawers does a home mechanic actually need?
Five to eight drawers covers most home garages. A five-drawer box like the LARBANKE holds wrenches, sockets, screwdrivers, pliers and a hammer if you organize it well.
An eight-drawer box like the Omelaza adds room for power tools and a bottom cabinet for bulky cases.
More drawers isn't automatically better. A box with 10 shallow drawers holds less than one with six drawers in mixed heights.
Match the drawer count and depth to your tool mix rather than chasing the biggest number. Count the tools that have no home now, then pick a box with a row for each group.
Do you need braked casters on a tool chest?
At least two braked casters are worth having. When you pull a loaded drawer, the cabinet wants to roll toward you.
Brakes on two wheels stop that on flat concrete. All four braked wheels, as on the 8-Drawer Assembled box, hold better on a sloped driveway or a slick epoxy floor.
Smaller casters roll easier on smooth floors and catch more on rough concrete. The LARBANKE boxes use 2.5-inch swivel casters with two brakes.
The Dkenicor uses larger industrial-grade wheels that handle gravel and concrete better. If your garage floor is cracked or gravelly, favor the bigger wheels, and if it's smooth epoxy, the silent casters on the LARBANKE and the 40-Inch box keep the push quiet.
What top surface works best in a garage?
A plastic top is the practical choice for a garage. It doesn't rust, it wipes clean of oil and dust, and it won't dent under a dropped wrench the way thin steel can.
The LARBANKE 5-drawer has a molded plastic tray with compartments for the tools you reach for most. It also has plastic on the base for impact resistance, which helps when the box sits in a puddle after a wet car pulls in.
A steel top gives you a flatter work surface and holds a magnetic tray. It also rusts if brake fluid sits on it.
Whichever you choose, keep the top clear enough to set down a part while you work.
How do you keep a loaded tool chest from tipping?
Load the heaviest tools low. Sockets and hammers belong in the bottom cabinet or the deepest drawers, not the top drawer.
That lowers the center of gravity and makes the box less likely to tip when a drawer is fully open.
Also open one drawer at a time. A cabinet with several drawers pulled out at once shifts its weight forward.
The LARBANKE boxes have an anti-tipping design and full-extension drawers, but weight placement still matters most. Put the box against a wall rather than in the open floor, and brake the casters before you pull anything.
Which automotive tool chest with wheels should you buy?
Buy the LARBANKE 5-Drawer for most home garages. Its full-extension drawers and waterproof plastic top handle daily mechanic work better than anything else here at its size.
Add the LARBANKE 7-drawer later and the two boxes stack into 12 drawers without taking a wider wall.
Pick by your main need: the Omelaza for the most storage, the Dkenicor for power tools and hanging space, the 8-Drawer Assembled box or VEVOR 2-in-1 for a split design you can carry, the Maxority for smooth ball-bearing slides, and the 40-Inch box for long tools. For a smaller cabinet that travels easily, see our portable tool chest picks.
If you're setting up a whole garage, our tool chests for a home garage guide covers the bigger cabinet choices. Shopping on a budget?
Our budget rolling tool chest roundup covers cheaper options. And for the full category, start with our best tool chests on wheels guide.
Our top 3 picks at a glance
-
1
Best overall for most garages
LARBANKE 5-Drawer Rolling Tool Chest with Wheels
8.9/10 our score
See it on Amazon -
2
Best for maximum storage
Omelaza 8-Drawer Rolling Tool Chest with Lock
8.7/10 our score
See it on Amazon -
3
Best for power tools and hanging storage
Dkenicor 6-Drawer Rolling Tool Chest
8.6/10 our score
See it on Amazon
Frequently asked questions
What size automotive tool chest with wheels fits a one-car garage?
A cabinet around 24 to 26 inches wide and 13 inches deep fits most one-car garage walls without blocking a door. The LARBANKE 5-drawer is 24.6 x 13 x 28.7 inches.
Leave clearance in front for the drawers to open fully.
How many drawers do I need for mechanic tools?
Most home mechanics get by with 5 to 8 drawers. Put sockets and wrenches in the large drawers, screwdrivers and pliers in medium ones, and small parts in the shallow drawers.
A box with 8 drawers and a bottom cabinet, like the Omelaza, holds a full socket set plus power tools.
Are braked casters worth having on a tool chest?
Yes, two braked casters keep the cabinet from rolling when you pull a loaded drawer. All four braked wheels, as on the 8-Drawer Assembled Rolling Tool Chest, hold even better on a sloped driveway or a smooth epoxy floor.
Can I split a rolling tool chest into two pieces?
Some models separate into a top tool box and a bottom cart. The Omelaza, Dkenicor and VEVOR 2-in-1 all do this, and the top box can be lifted off for work at the car.
Each half often has its own lock.
What is the plastic top on the LARBANKE chest for?
The LARBANKE 5-drawer has a molded plastic tray on top. It sheds water and oil and gives you a spot for the tools you use most, so the top stays dry and rust-free while you work under the hood.
How much weight can these rolling tool chests carry?
Steel cabinets of this size handle hand tools and socket sets well. Keep the heaviest items in the bottom cabinet or the deepest drawers to lower the center of gravity and make the box less likely to tip when a drawer is open.
